Road train and B-double towing in South East Queensland
Multi-trailer combinations cannot always be towed in one piece. Tamborine Tilt Trays splits the set safely and moves every trailer, up to 97 tonnes.
Call a tow truck: 0418 968 882Towing for multi-trailer combinations
A B-double or a road train is not one vehicle. It is a prime mover and two or more trailers, coupled together, often more than twenty-five metres long and carrying a full load. When one stops, every unit has to be dealt with. Tamborine Tilt Trays tows multi-trailer combinations up to 97 tonnes, splitting the set where needed and moving every trailer.
This is specialist work. It depends on knowing how the trailers are coupled, how the weight is spread across them and what the road ahead will allow.
We tow B-doubles and road trains 24 hours a day across the Scenic Rim, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba, including the Warrego Highway freight corridor.
How multi-trailer towing works
- Call us
Tell us how many trailers, what they carry and where the set has stopped. - We plan the move
We work out whether the combination can be towed whole or needs to be split. - We split the set
Trailers are uncoupled safely where the combination cannot be towed whole. - Every trailer moved
The prime mover and each trailer are delivered to your yard or repairer.
Combinations we tow
- B-doubles
- A-doubles and road trains
- Semi-trailers
- Truck and dog trailer combinations
- Loaded and empty trailer sets
- Tankers, tippers, flat-tops, tautliners and livestock crates
How multi-trailer combinations are handled
Why a set often has to be split
There are limits to how long and how heavy a towed combination can be, and to what a road will accept. Adding a tow truck to the front of a B-double makes an already long vehicle longer, and the turning path and the braking both change.
On an open highway with a short run to a yard, a combination can sometimes be towed as it stands. Where the route includes tight intersections, steep grades, roundabouts or a long distance, splitting the set and moving the units separately is safer and often faster.
How trailers are uncoupled at the roadside
Uncoupling on the shoulder is not the same as doing it in a depot. The ground may be sloping or soft, the load may be sitting on the turntable, and traffic is passing. Landing legs need firm footing, and the trailer has to be held on its own brakes before the coupling is released.
We choose the place to split carefully. If the set can be moved a short distance to a rest area, a truck stop or a wide, level shoulder, that is usually where the work is done.
Moving the lead and the rear trailer
In a B-double, the lead trailer carries the turntable for the trailer behind it. Once the set is split, each trailer is moved by a prime mover or a tow unit. The order they go in depends on which is blocking the road, which carries the urgent freight and where each has to end up.
Tell us if the trailers are going to different places. A common arrangement is for the loaded trailers to go on to the customer or a depot while the failed prime mover goes to a workshop.
Dollies and road train couplings
Road trains use converter dollies between trailers, which adds more units and more couplings to deal with. Each dolly has to be accounted for and moved along with the trailers.
Tell us exactly how the set is made up: how many trailers, how many dollies and what type of couplings. That decides how many units we bring.
Keeping the freight moving
For most operators, the load matters more than the truck. If the prime mover has failed but the trailers are sound, the quickest fix is often a replacement prime mover to take the set on. We can supply a prime mover with an operator for that purpose. See our prime movers and trailers page.
What to tell us when you call
- Your exact location and direction of travel
- The type of combination and the number of trailers and dollies
- What each trailer carries and the approximate gross weight
- Which unit has the fault, and what the fault is
- Whether the engine runs and the air system builds pressure
- Whether the set is on the road, the shoulder or in a rest area
- Where each unit needs to go
Loads that change the plan
- Dangerous goods: tell us the class and follow your emergency procedure
- Bulk liquids in tankers: weight moves as the vehicle moves
- Livestock: animals cannot wait on a hot roadside, so tell us straight away
- Refrigerated freight: let us know how long the fridge units can run
- Grain, sand and gravel: tell us whether the tippers are full
- High, wide or overhanging loads: these may need permits to move
Where we tow multi-trailer combinations
Most B-doubles and road trains in our area are on a small number of approved routes, and that is where we do most of this work. The Warrego Highway carries freight between Brisbane, Ipswich, the Lockyer Valley, Toowoomba and the west. The Cunningham Highway and the Mount Lindesay Highway serve the Scenic Rim and the routes south. The M1 and the Logan Motorway link Brisbane, the port and the Gold Coast.
We also attend depots, grain facilities, quarries, feedlots and distribution centres where a combination has failed in the yard or on the way in or out.
Safety when a long combination stops
A stopped combination can block a shoulder for a long way, and its rear can be hard to see over a crest or around a bend. Put hazard lights on, place warning triangles well back from the rear trailer, and stay out of the traffic lanes. If any part of the set is in a live lane, call 000.
Do not uncouple trailers yourself on a slope or soft ground. Wait for us and we will do it where it is safe.
What affects the cost of B-double and road train towing
Multi-trailer jobs are priced on the gross weight, the number of units to be moved, the distance each has to travel, the time spent splitting and re-coupling and the time of day. Because every set is different, we quote on the details you give us.
Why multi-trailer work needs planning
With a single truck, the job is usually clear from the first phone call. With a B-double or a road train there are more decisions to make, and they are best made before the trucks leave the yard. How many units are needed? Where can the set be split? Which trailer goes first? Where does each unit end up?
Getting those answers right at the start avoids a second trip and shortens the time the combination spends on the roadside. That is why we ask more questions about a multi-trailer job than about any other.
What the driver can do before we arrive
- Get the combination as far off the road as it will safely go
- Set out warning triangles behind the rear trailer
- Note which unit has the problem and what the symptoms were
- Check whether the trailers’ landing legs wind down freely
- Look at the ground beside each trailer: is it firm and level enough to stand a trailer on?
- Have the load paperwork and any dangerous goods documents ready
- Let the depot and the customer know about the delay
Re-coupling and getting back on the road
If the fault is in the prime mover and a replacement is on its way, the trailers can often stay coupled to each other and simply be picked up by the new truck. If the set has been split and moved to a yard, it is re-coupled there once the repair is done or the replacement arrives.
Tell us at the start what you want the end result to be: trailers delivered to the customer, the whole set returned to your depot or everything taken to a workshop. We plan the job backwards from that.
When only one trailer is the problem
Sometimes the prime mover is fine and a trailer has failed: a seized hub, a collapsed suspension, a brake fault or crash damage. In that case the good units can continue once the set is rearranged, and the failed trailer is recovered separately. A trailer that cannot be towed on its own wheels may need to be carried.
Road train and B-double towing questions
Do you move all the trailers, or only the prime mover?
All of them. We split the set and move every trailer.
Can you tow a loaded B-double?
Yes, up to 97 tonnes. Tell us the load so we send the right units.
Can you take the trailers to the customer and the truck to the workshop?
Yes. Tell us where each unit needs to go.
Can you supply a prime mover to finish the run?
Yes. A prime mover with an operator can take over your trailers.
Do you tow livestock and tanker combinations?
Yes. Tell us what is on board so the job can be planned around it.
Is this available at night?
Yes. We answer the phone 24 hours a day, 7 days a week.
Where do you offer road train and B-double towing?
Tamborine, the Scenic Rim, Beaudesert, Boonah, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba.