Machinery transport from Mount Tamborine across South East Queensland
Tamborine Tilt Trays moves plant and equipment between sites, yards and workshops, from a forklift to heavy earthmoving machines.
Call a tow truck: 0418 968 882Machinery transport from yard to site and back again
Machines earn money when they are working, not when they are waiting for a truck. Whether it is an excavator needed on a house pad on Monday morning, a forklift going back to the hire company or a generator heading to an event, Tamborine Tilt Trays moves plant and equipment on time and in one piece.
We carry everything from compact machines that fit on a tilt tray to heavy earthmoving equipment, with loads up to 97 tonnes. The truck is chosen to suit the weight and dimensions of the machine, and the route is planned to suit both.
We collect and deliver across Tamborine Mountain, the Scenic Rim, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba, including farms, acreage blocks, quarries, building sites and industrial estates.
How machinery transport works
- Call with the details
Tell us the machine, its weight and size, and the addresses. - We send the right truck
The truck is matched to the weight and dimensions of your machine. - Loaded and restrained
The machine is driven or winched on and chained down. - Delivered to site
Your machine is unloaded where you need it.
Machinery we move
- Forklifts and telehandlers
- Bobcats, skid steers and posi-tracks
- Mini, midi and full-size excavators
- Dozers, graders and loaders
- Rollers and compaction equipment
- Tractors and farm implements
- Scissor lifts, boom lifts and other access equipment
- Cranes
- Generators, compressors and industrial plant
- Site sheds, tanks and containers
Moving different kinds of machinery
Compact machines: bobcats, mini excavators and scissor lifts
Small machines are the bread and butter of machinery transport. They move constantly between hire yards, jobs and workshops, often at short notice. Most can be driven straight onto a tilt tray, chained down and on the road within minutes.
Tell us about attachments. Buckets, augers, rippers, grabs and trenchers add weight and length, and loose attachments need to be loaded and restrained separately.
Forklifts and warehouse equipment
Forklifts are heavier than they look, with most of the weight low and at the back. They also have small wheels and very little ground clearance, so the loading angle matters. Tell us the capacity and whether it is electric, gas or diesel, and whether the mast can be lowered or tilted to reduce the height.
Electric forklifts with a flat battery cannot always be driven on. Tell us if it does not run.
Excavators, dozers and other tracked machines
Tracked machines are wide, heavy and hard on the surfaces they cross. The weight and the track width decide what truck is needed, and larger machines may be over the width limit for normal travel, which brings permit and pilot requirements. See our over-dimensional loads page.
Tell us the make and model. That gives us the operating weight and transport dimensions. Let us know about buckets, rippers, blades and any modifications.
Tractors and farm machinery
Farm machinery comes in awkward shapes. Tractors with front-end loaders, slashers, balers, spreaders and seeders are often wide and tall, with weight in unexpected places. Tell us what the implement is and whether it will travel attached to the tractor or separately.
Farm pickups also mean farm access. Tell us about gates, grids, creek crossings, low branches and how firm the ground is where the truck will stand.
Cranes, generators and industrial plant
Heavy plant that does not move under its own power has to be lifted or winched onto the truck and may need a crane or forklift at each end. Tell us how it was put where it is and how it will be taken off at the destination. If it has lifting points or a skid base, that helps.
Details we need to quote
- The machine: make, model and type
- Its operating weight, with attachments
- Length, width and height in transport position
- Whether it runs and can be driven on
- Pickup and delivery addresses
- Access at each end: gates, slopes, soft ground, overhead lines
- When it needs to be there
- A site contact at each end
How machinery is loaded and restrained
A machine on a truck has to stay exactly where it was put under braking, cornering and on rough roads. It is positioned so that its weight sits correctly over the truck’s axles, then lowered onto its attachments, with booms and buckets resting on the deck and the park brake applied.
The machine is then restrained with chains rated for its weight, attached to its proper tie-down points. Articulated machines are locked so they cannot pivot, slew locks are engaged on excavators and loose attachments are secured separately.
Getting the site ready
- Have the machine at a spot the truck can reach, on firm and reasonably level ground
- Clean heavy mud off tracks and buckets, as it falls off on the road
- Lower booms, masts and attachments to transport position
- Make sure there is fuel and a charged battery so it can be driven on
- Have the keys, and someone who can operate the machine if needed
- Check overhead clearance for powerlines and trees where the truck will load
- Tell neighbours or site management if the truck will block an access road for a few minutes
Who we move machinery for
- Earthmoving and civil contractors
- Builders, landscapers and concreters
- Plant hire companies and their customers
- Farmers and rural property owners
- Warehouses and manufacturers
- Machinery dealers and auction buyers
- Councils, event companies and film crews
Owner-operators with a single machine use the service as much as large fleets do. If you have bought a machine at auction or from a private seller and need it home, tell us what it is and where it is and we will collect it.
Machines that do not run
A machine that will not start, will not track or has lost its hydraulics is harder to load than one that drives on. It can usually still be moved, by winching it onto the deck or by using another machine or a crane to help.
Tell us exactly what works and what does not. On tracked machines, tell us whether the tracks turn freely, because a machine with locked final drives has to be dragged or lifted, which changes the job.
Access on acreage and hinterland properties
Many of the properties we visit on Tamborine Mountain and in the Scenic Rim are on steep, narrow or unsealed roads. A truck carrying a machine needs room to turn, firm ground to stand on and enough overhead clearance to load.
If the truck cannot reach the machine, the machine may need to be driven or walked out to the road. Describe the driveway honestly, and send photos if you can. It saves a wasted trip.
What affects the cost of machinery transport
The price depends on the weight and size of the machine, the distance, the truck required, how easy it is to load and unload, and whether permits or pilot vehicles are needed for an over-size load. Return trips and regular work can be quoted together.
Hire returns, auctions and regular runs
Three kinds of job make up much of our machinery work. Hire returns and deliveries run to a deadline, because an off-hire machine that is still on site keeps costing money. Auction and dealer pickups need the machine collected within the yard’s release window, with the paperwork in order. Regular runs for contractors move the same machines between a depot and a changing list of jobs.
For all three, tell us the reference or lot number, the contact at the yard and any release or site entry requirements. If you move machines often, ask about booking a standing arrangement so that a call the afternoon before is all it takes.
Machinery transport questions
Can you move a machine that does not run?
Yes. Tell us when you call so we plan how to load it.
How heavy a machine can you carry?
We handle loads up to 97 tonnes.
Do I need to be there to load the machine?
Someone who can operate the machine should be there, unless you have arranged otherwise with us beforehand.
Can you move attachments and buckets as well?
Yes. Tell us what they are so space and restraints are allowed for.
Can you deliver to a farm or an acreage block?
Yes. Tell us about the access so the right truck is sent.
Can you move a machine at short notice?
Call us. We answer the phone 24 hours a day and will tell you when a truck is available.
Where do you offer machinery transport?
Tamborine, the Scenic Rim, Beaudesert, Boonah, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba.