Skip to content

Oversize transport: shipping containers and larger vehicles

Tamborine Tilt Trays moves shipping containers and vehicles too large for a standard tow truck.

Call a tow truck: 0418 968 882

Oversize transport for bulky loads

Some loads are not especially heavy. They are just big. A shipping container, a caravan-sized site shed, a boat on a cradle, a large four-wheel-drive bus or a truck too tall for a standard tray all need more deck space and more planning than an ordinary tow. Tamborine Tilt Trays moves shipping containers, larger vehicles and other bulky items that will not fit a standard tow truck.

Our tilt trays handle many of these jobs directly. Bigger loads go on larger trucks and trailers, and loads beyond the legal size limits are moved under permit.

We work across Tamborine Mountain, the Scenic Rim, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba.

How oversize transport works

  1. Call with the details
    Tell us what it is, its size and weight, and the addresses.
  2. We check the fit
    The dimensions are checked against the truck and the route.
  3. We send the right truck
    The truck is matched to the size of the load.
  4. Placed where you want it
    We unload at the delivery address.

Oversize loads we carry

  • Shipping containers, 20 foot and 40 foot
  • Site sheds, portable offices and amenities blocks
  • Larger vehicles such as motorhomes, minibuses and small trucks
  • Boats on cradles or trailers that cannot be towed
  • Water tanks and silos
  • Large crates, plant and fabricated items
  • Loads too long, wide or tall for a standard tilt tray

Moving shipping containers

Container sizes and weights

The two common sizes are the 20 foot container, about 6 metres long, and the 40 foot, about 12 metres. Both are roughly 2.4 metres wide. A standard container is about 2.6 metres high and a high-cube is about 2.9 metres.

An empty 20 foot container weighs a little over 2 tonnes and an empty 40 foot nearly 4 tonnes. Loaded, they can weigh many times that. Tell us the size, whether it is a high-cube and whether it is empty or loaded.

Empty containers

Empty containers are bought for storage on farms, acreage and building sites, and moved again when a job finishes or a property is sold. An empty container can be winched onto a tilt tray and slid off again at the other end, which means no crane is needed.

For this to work, the container needs clear space in front of it for the truck to line up, and the delivery spot needs the same.

Where the container will sit

Decide exactly where the container is going before the truck arrives, and which way the doors should face. Once it is on the ground it is very difficult to move without a truck or a crane.

The ground should be firm and level. Most people set a container on blocks, sleepers or concrete pads at each corner so that air can circulate underneath and the doors open and close properly. Have these ready and in position.

Access for delivery

A truck sliding a container off its deck needs a long, straight run: the length of the truck plus the length of the container, and more to drive forward out from under it. It also needs overhead clearance while the deck is tilted, clear of powerlines, eaves and branches.

Measure the space and tell us what you have. A 40 foot container needs a great deal more room than a 20.

Larger vehicles

Vehicles that are too long, too tall or too heavy for a standard tilt tray still need to be moved when they break down or change hands. Motorhomes, minibuses, small trucks, dual-wheel utes with long trays and four-wheel-drives with roof-top tents and high lifts all fall into this group.

Tell us the length, the height and the weight. Height is the one people forget. A tall vehicle on a truck deck can be well over four metres from the road, which rules out routes with low bridges, awnings or overhanging trees.

Site sheds, tanks and other bulky items

Portable buildings, tanks, silos and large crates are awkward because they are light for their size and catch the wind. They need a deck long and wide enough to sit on fully and to be restrained properly.

Tell us what the item is made of, what it weighs, whether it has lifting points or skids and how it was put where it is now. Poly water tanks, for example, are light but easily damaged by straps in the wrong place.

Details we need to quote

  • What the load is
  • Its length, width and height
  • Its weight, or whether it is empty or loaded
  • Whether it rolls, slides or has to be lifted
  • Pickup and delivery addresses
  • How much clear space there is at each end
  • Overhead obstructions at each end
  • When it needs to move

When a load is over the legal size limits

There are limits on how wide, how high and how long a vehicle and its load can be on public roads without a permit. A load that goes beyond them is an over-dimensional load, and it travels under conditions that can include permits, warning signs and lights, restricted hours and pilot vehicles.

If your load is wider than a standard container or will stand very tall on a truck, read our over-dimensional loads page. We will tell you when you call whether a permit is likely to be needed.

Preparing for pickup and delivery

  • Empty the container or secure its contents so nothing can slide
  • Lock container doors and remove padlocks that could swing
  • Clear the area in front of the load so the truck can line up
  • Mark the delivery position and have blocks or pads in place
  • Check for powerlines and branches where the deck will tilt
  • Make sure gates open fully and are wide enough for a truck
  • Have someone on site who can say exactly where the load goes

Oversize transport on rural and acreage blocks

A large share of this work is on properties around Tamborine Mountain, the Scenic Rim and the Lockyer Valley. Rural driveways are often long, narrow, steep or unsealed, with cattle grids, culverts and overhanging trees. After rain, a paddock that looks firm can bog a loaded truck.

Tell us about the driveway and the ground. If the weather has been wet, it can be better to wait a few days than to risk a truck stuck on your property.

What affects the cost of oversize transport

The price depends on the size and weight of the load, the truck required, the distance, the time needed to load and place the item and whether permits or pilot vehicles are needed. Difficult access adds time.

Buying a container or a shed that needs delivering

Many oversize jobs start with a purchase. Someone buys a used container from a depot, a site shed from an online listing or a tank from a neighbour, and then has to work out how to get it home. Before you pay, it is worth a quick call to check that the item can be collected from where it is and delivered to where you want it.

Ask the seller how it will be loaded and whether there is room for a truck to line up in front of it. Check its condition, particularly the floor and the underside of a container, because a rusted base can fail when it is winched. And measure your own gate, driveway and delivery spot against the size of the item. A few minutes with a tape measure avoids an expensive surprise on delivery day.

Oversize transport questions

Can you move a shipping container?

Yes. Tell us the container size and whether it is loaded.

Can you deliver to a private property?

Yes. Tell us about access, such as gates, slopes and overhead lines.

Do I need a crane to unload a container?

Not for an empty container delivered on a tilt tray, as long as there is room for the truck to slide it off.

Can you transport a motorhome or small bus?

Yes. Tell us the length, height and weight.

Is a permit needed for my load?

It depends on its dimensions. Give us the measurements and we will tell you.

Where do you offer oversize transport?

Tamborine, the Scenic Rim, Beaudesert, Boonah, the Gold Coast, Brisbane, Ipswich, the Lockyer Valley and Toowoomba.

Oversize load? Call us.

0418 968 882